Alexander - Rope Access Rigger - L3

09.09.2019-20.12.2019: Onshore Projects UK

• L3 Team Lead - painting and blasting
• High pressure jet cleaning of tank
• Assisting in rigging lifts
• Installation of quick deck
• Setting up of milos habitats for red led blasting flare lines

08.04.2019-02.09.2019 : Offshore Projects NL

• Performing all aspects of fabric maintenance
• L3 Fabric Maintenance Charge-hand
• Carrying out all Fabric Maintenance work on Jacket
• Hot pressure washing, blasting, strip coating and spraying

31.01.2019 - 01.04.2019: Onshore Projects Scotland

• Painting foot bridges in Scotland
• Mechanical preparation
• Spot repair
• Pressure washing
• Paint spec chemco
• Applying primer, middle coat and top coat

01.12.2018-28.01.2019: Onshore Project UK

• Working on Crossing
• Using mechanical & manual tirfor, lever hoist, slinging and chain block
• Building up frames to support the web deck and hauling web deck into place
• Fitting the safety net

05.11.2019-27.11.2018: Onshore Industrial Projects Belgium

• Pressure washing sugar from the silo
• Sa2/half steel shot blast
• Aid climbing roof rafters for strip coating
• Spraying 10000 square fit
• Operating pump room
• Spec silka

22.06.2018-29.10.2018: Offshore Blasting & Painting UK

• Industrial painting and preparation, painting and blasting
• Using a needle gun and blaster for preparing paint surface
• Bristle blasting & needle gunning, blasting decks
• Spec is 954 & 990 top coat paint
• Hand brush and rolling application
• Mixing solvent based 2 pac paints/ cleaning with solvent thinners

15.01.2018-01.06.2018: Onshore Industrial Painting Projects UK

• Industrial painting and preparation, painting and blasting
• Using a needle gun and blaster for preparing paint surface
• Hand brush and rolling application
• Mixing solvent based 2 pac paints/ cleaning with solvent thinners
• Sand blasting dead man valve
• Harbour freight blast cabinet
• Preparing to spray with Graco sprayer
• Grinding and buffing surfaces

12.09.2017-21.12.2017: Onshore Projects UK

• DT 250 hand core drilling and DD 350 core drilling
• Olec overhead bracket installation
• Core samples and core recording up to 3 metres
• Painting and blasting
• Sintec anchor installation up to 3 metres
• Grouting anchors and Petzl anchor installation
• Rope rigging and hauling systems
• Shuttering Olec brackets and grouting

02.05.2017-11.08.2017: Onshore Project UK

• Geo-technical work
• Painting
• Soil nailing up to 4 metres
• Catch fence installation, cable pulling, shuttering and grouting
• Re-pointing viaduct bridge
• Rock scaling, mesh netting, core drilling DD 350 and pull testing anchors

11.2013-11.2016: Onshore Projects Australia

• Painting and Decorating at various domestic and commercial locations

08.2013: Onshore Projects UK

• Painting and Decorating apprenticeship
• Responsibility for all aspects on interior/ exterior painting and decorating including preparation, filling, gaping, sanding, cutting and rolling walls and ceilings
• Full preparation on woodwork from scratch and high end gloss finish

07.2009-07.2010: Onshore Projects UK

• Carrying out any and all skilled journey-level work required to construct, maintain and formulate finished and rough carpentry repairs, internal or external to a structure
• Working on skilled fabrication, erection, maintenance and repair of rigging devices, trusses and other structural assemblies